When getting braces, how much extra on average does it cost to get the clear acrylics vs. regular metal ones

I might have to get braces...but they will look horrible on me...so I want to know how much the acrylic clear ones would be compared to the regular metal ones


How much more would the acrylics cost on average?When getting braces, how much extra on average does it cost to get the clear acrylics vs. regular metal ones
a better choice then acrylic would be ceramic





its about 300 more i got metal on the bottom row and ceramic on top and honestly lots of people dont even notice that i have braces!





EDIT: another advantage of ceramic is that although it's clear, it doesn't stain!When getting braces, how much extra on average does it cost to get the clear acrylics vs. regular metal ones
my orthodontist costs like 500 - 1000 more. Depending on how your teeth are you might have to get normal braces before. Like they wouldn't give me the clear ones because of the way my teeth are. I thought i would look terrible with braces and i just got mine on and really theyre not that bad i can tell you that.
im getting silver because they dont turn a gross color like clear but were i went it cost 600 dollars more but it depends on where u go i went to Arkansa
We don't charge extra in my office anymore, but it used to be about $500.00 more.

microsoft word>

What is a good clear coat for a 1/48 scale airplane painted in acrylics?

Painted several 1/48 model airplanes in flat acrylic paints, mostly Testors Acryl and Tamiya paints, and need to get a flat or satin clear coat on top.What is a good clear coat for a 1/48 scale airplane painted in acrylics?
For that purpose I would use concept 20/20 made by PPG

Is the deluxe acrylic with sealer coat and polyurethane clear coat good for a paint job?

I see two auto body shops advertising these paints and clear coat deals in the newspaper and was wondering if these were good stuff for the low price. They are asking about $299-$349 for the paint, sealer, and polyurethane clear coat. And the $299 deal comes with a 4 year guarantee. I am just looking for something to freshen up my car and not going for a custom,show car paint job. I am also planning to sand and primer it myself or should I just let them spray it? (My car is white)Is the deluxe acrylic with sealer coat and polyurethane clear coat good for a paint job?
Is Deluxe the brand or just a description. It sounds very cheap. With paint, you really get what you pay for.





If you are just wanting a average white paint job, I would go to a auto paint store and get an acrylic enamel white paint. You should be able to get a gallon of paint with reducer and harder for $200 - $250. If you are just repainting (no body work) and your old paint is not peeling then you shouldn't have to use primer or sealer. Just wet sand with 400 grit and paint right over the old paint. With acrylic enamel you don't have to mess with a clearcoat.Is the deluxe acrylic with sealer coat and polyurethane clear coat good for a paint job?
I hate ';clear coat';


It fades, peels, and cracks.





ADDED:


Clear coat just make crappy paint less crappy looking.





ADDED#2


White paint. Oh Jeeze....DON'T CLEAR COAT WHITE PAINT!
. Sanding and primering yourself is a good idea.

What clear solid surface can I peel acrylic paint off! I have used shipping plastic, need a solid sheet?

I am making paintings (fine art) that can be painted and lifted like large decals. I have used 6 mil shipping plastic, This works great, but is hell to format and non-permanent. I need to identify and locate a more stable substitute. (Clear plastic sheeting; large solid sheets that watersoluble paint will peel off of.)





I would think the same thing tupperware is made of (polypropylene), but cannot find it in flat clear sheets. Does anyone know what the clear painters pallettes are made of (melamine?) and if it is sold in sheets to the public?





I have been trying to put a finger on this for over 2 years--any help or leads out there?





thanxWhat clear solid surface can I peel acrylic paint off! I have used shipping plastic, need a solid sheet?
Poly carbon Lexan would work well. My husband was the plant manager for a place that made clear bottom kayaks and that it what they used. It comes in different thicknesses and is bulletproof. One of my hubby's fav tests for the buyer was to take a 12 lb sledgehammer and beat on the kayak to show how strong it was. It is also very lightweight. The whole kayak only weighed 38 lbs. I did the graphics on them and the acrylic should peel off nicely. If you would like more info go to my profile and e-mail me. Good luck!What clear solid surface can I peel acrylic paint off! I have used shipping plastic, need a solid sheet?
try some of your local sign painters. They have a lot of strange plastic sheets that they do signs on. I buy one type that you can stick to a car window and remove. I put signs on them so I can remove and reapply. That might even work. You could adhere it to a piece of glass ...do your paint application....let it dry and then remove.





Mylar from an art supply might work...
get a sheet of glass my friend and tape the edges in a good duct tape-also you can go to a plastics store and buy sheets of acrylic. Different thickness', different prices of course-buy something small-you can also go to crafts stores to buy pre-cut to use instead of glass in frames-check it out, I bet it will work. Worth a couple $$ to know-
Glass is good. Prepare the surface with a undiluted liquid soap wash and let that dry. Across that you do a quick layer of medium or any color you want. Quick is the key as you don't want to mix it with the soap to much. Let it all dry and do your thing.





It isn't the read-made solution you were looking for but this works very well.
Check out Home Depot or Lowes if you have one around. Plenty of things there.

HELP....I JUST PAINTED MY TRUCK WITH ACRYLIC ENAMEL, IT IS EXTREMELY ORANGE PEELED..CAN I WET SAND AND CLEAR?

WONDERING IF I CAN WET SAND AND APPLY CLEAR COAT.HELP....I JUST PAINTED MY TRUCK WITH ACRYLIC ENAMEL, IT IS EXTREMELY ORANGE PEELED..CAN I WET SAND AND CLEAR?
You can do what ever you want, but if you simply sand and clear coat, you'll have orange peal under clear coat...probably not the look you were going for.





Simply put, you screwed up the surface preparation or application of the paint. Time to strip and do it right.HELP....I JUST PAINTED MY TRUCK WITH ACRYLIC ENAMEL, IT IS EXTREMELY ORANGE PEELED..CAN I WET SAND AND CLEAR?
Yes,you can do that.The simplest and safest way to make it right would be to water sand it smooth with 400 grit.Then respray it with the color again.This time use a quality slower drying reducer and more of it.Spray at a higher pressure and apply a couple thin wet coats.
wet sand and then buff with fine rubbing compound to restore the gloss. acrylic enamel is not intended to have clear on it

Im looking for a clear nail tip that you put acrylic under so the tip top stays smooth - where can i find this

I recommend Sally Beauty Supply - I also like to use clear tips and they have a good selection.Im looking for a clear nail tip that you put acrylic under so the tip top stays smooth - where can i find this
Check out your local wal-mart. They have acrylic kits that you can do yourself.Im looking for a clear nail tip that you put acrylic under so the tip top stays smooth - where can i find this
HUGH?
Sally Beauty Supply.
you sound gay

What is a good clear coat for a 1/48 scale airplane painted in acrylics?

Painted several 1/48 model airplanes in flat acrylic paints, mostly Testors Acryl and Tamiya paints, and need to get a flat or satin clear coat on top.What is a good clear coat for a 1/48 scale airplane painted in acrylics?
For that purpose I would use concept 20/20 made by PPG

Acrylic Nails... White Tips or clear?

Last time i got acrylic nails they used a white tip. my friend gets the white painted on. which one is better?


Thanks!!Acrylic Nails... White Tips or clear?
The white tips will look good at first but once they grow out, or if you break one, they don't look so great. I would stay with the clear.Acrylic Nails... White Tips or clear?
Tips or Painting the white on, it's not done right. The right way is White Acrylic %26amp; Pink Acrylic. They put the white on first then they put the pink on. Nails Set, only put Clear Nail polish on. Salons %26amp; Spa's do them. They cost a little more, but you fill them once a month.

Report Abuse

White tip grows out %26amp; looks goofy. Go with clear.
Just get the pink and white full set next time. They look better and the white tip does not turn yellow. It is a little more for the pink and white but is very worth it.
When I get acrylic nails put on I always get the white tip! I had the white painted once and within a few days it started to chip and look terrible.
White tips are classy - pink tips are youthful and more demure.
i think if the white is painted on, it looks more natural than if the white is already there.

Clear, drink-safe sealant for acrylic?

I'm going to be building a model of a cup I designed out of stacked, lasercut acrylic pieces (I'm taking a SolidWorks model, slicing it horizontally, and building the cup from those slices). Ideally, this cup will be actually useable, which would require that the acrylic be somehow sealed in a way that is both watertight and non-toxic.





I have had experience with using acrylic solvent to create strong bonds between pieces, and I think that I could make it watertight if I'm careful- but are there any toxic chemicals still present after the stuff dries?





The other way I've thought of is to use aquarium-grade silicon, since that is reasonably clear and is both watertight and nontoxic- but it's also very thick, and a thinner formula would be far better suited for my purposes.





Has anyone used one of these methods before? Does anyone know of any sealants that fit my needs?





Thanks for any help you can give.Clear, drink-safe sealant for acrylic?
Call the mfg of the adhesive you want to use.





Check out Alibre, you should be able to get a free copy for home use and import your .step file from the class.

I have acrylic nails and have the two tone look going, however I want to make them all clear how do I do this?

Next time you have them done, ask for just a regular french manicure for the most natural look.I have acrylic nails and have the two tone look going, however I want to make them all clear how do I do this?
not sure but can always ask the next time you go to the nail salon

Does a mural on a wall painted with acrylics need some kind of clear coat?

I am painting a mural on my daughter's wall with acrylic paints. Should I put some kind of clear protectant on it to keep it from being scraped off?Does a mural on a wall painted with acrylics need some kind of clear coat?
i always ';shallac'; every piece of work i do.


shallac it pretty much just a clear coat that comes in a spray can, its affordable and you can get it at any art store, it doesn't ruin the painting at all, it just makes it a little shiny


hope that helps! (-:Does a mural on a wall painted with acrylics need some kind of clear coat?
The problem with shellac it can yellow the colors





I use a water based polyurethane with UV protection in a matte finish-- ( Sikkens) so no shine





http://www.AliciaTappDesigns.com


Any image on Tiles
No, but you will need to prime it if you ever decide to paint over it.

Clear, drink-safe sealant for acrylic?

I'm going to be building a model of a cup I designed out of stacked, lasercut acrylic pieces (I'm taking a SolidWorks model, slicing it horizontally, and building the cup from those slices). Ideally, this cup will be actually useable, which would require that the acrylic be somehow sealed in a way that is both watertight and non-toxic.





I have had experience with using acrylic solvent to create strong bonds between pieces, and I think that I could make it watertight if I'm careful- but are there any toxic chemicals still present after the stuff dries?





The other way I've thought of is to use aquarium-grade silicon, since that is reasonably clear and is both watertight and nontoxic- but it's also very thick, and a thinner formula would be far better suited for my purposes.





Has anyone used one of these methods before? Does anyone know of any sealants that fit my needs?





Thanks for any help you can give.Clear, drink-safe sealant for acrylic?
Call the mfg of the adhesive you want to use.





Check out Alibre, you should be able to get a free copy for home use and import your .step file from the class.

microsoft word>

I have acrylic nails and have the two tone look going, however I want to make them all clear how do I do this?

Next time you have them done, ask for just a regular french manicure for the most natural look.I have acrylic nails and have the two tone look going, however I want to make them all clear how do I do this?
not sure but can always ask the next time you go to the nail salon

Does a mural on a wall painted with acrylics need some kind of clear coat?

I am painting a mural on my daughter's wall with acrylic paints. Should I put some kind of clear protectant on it to keep it from being scraped off?Does a mural on a wall painted with acrylics need some kind of clear coat?
i always ';shallac'; every piece of work i do.


shallac it pretty much just a clear coat that comes in a spray can, its affordable and you can get it at any art store, it doesn't ruin the painting at all, it just makes it a little shiny


hope that helps! (-:Does a mural on a wall painted with acrylics need some kind of clear coat?
The problem with shellac it can yellow the colors





I use a water based polyurethane with UV protection in a matte finish-- ( Sikkens) so no shine





http://www.AliciaTappDesigns.com


Any image on Tiles
No, but you will need to prime it if you ever decide to paint over it.

Before I do an oil, I layer two coats of gesso, white, and then acrylic paint mixed with clear matte gel-paste

I suggest you use only two coats of gesso first one thinned down to soak into the canvas then a medium coat to finish let dry before painting -- your finished painting will be longer lasting and have higher appeal.Before I do an oil, I layer two coats of gesso, white, and then acrylic paint mixed with clear matte gel-paste
when using oils you need to size the canvas/support before the gesso. if you dont the oil may sink into the weave and cause it to rot at some later date. you need to get some caesin size, bone glue size or rabbit skin glue size. try your local hardware store or order some online at www.greatart.co.ukBefore I do an oil, I layer two coats of gesso, white, and then acrylic paint mixed with clear matte gel-paste
Don't use the acrylic paint with oil paint or your painting will crack it about a year. The gesso should be sufficient. Maybe more than two coats though. Gesso is meant to be a primer for everything. That's all you need.
no need for acrylic paint 2 coats of gesso is enought u use acrylic colored if u want to do a colored base only

Do i need some type of clear coat on acrylic paint?

I am painting ornaments made out of clay. I got them form a arts and crafts store. They were just plain white clay, and I am painting them with acrylic paint, but i noticed that the clay can scrape away. Is there any type of top coat I should be using?Do i need some type of clear coat on acrylic paint?
Yes, it is always best to seal your work with polyurethane (glossy or satin finish). I do that to all my art work (paintings, slates, crafts, etc.). Polyurethane can be applied with a brush or can be sprayed on (available in convenient spray cans). It not only protects the finish of your work but it also deepens and brightens the colors and gives your artwork more depth.Do i need some type of clear coat on acrylic paint?
Thank you for honoring me with your choice!

Report Abuse

i would use clear coat but you have to spray it on with a spray gun(for my guitar at least)

Is it possible to use gel stain on top of acrylic lacquer clear coat?

I would like to know the feasibility of using a gel stain on top of an acrylic lacquer clear coat. I have a piece of furniture made of pine with an acrylic lacquer clear coat and would like to stain the piece a different color. It isn't worth it to strip the piece, so I only want to know about coatings which could be applied over the acrylic lacquer (if any).





If a stain is possible, then what would be a suitable topcoat to seal in the stain? More acrylic lacquer?Is it possible to use gel stain on top of acrylic lacquer clear coat?
Look for something like what we used to call a ';varnish stain.'; You will have to scratch the surface a bit, but that should add the color that you want. Stain will not penetrate through the wood if it is sealed and laquer will seal it.Is it possible to use gel stain on top of acrylic lacquer clear coat?
no it won't work
you can't stain lacquer clear coat, you have to stain the wood
The stain has to soak in to the wood. The lacquer clear coat would prevent this. You must strip the piece prior to applying the gel stain.





As for a top coat acrylic lacquer is easy to apply and dries fast so you can apply several coats in one day. It is not as water resistant or as durable as polyurethane or urethane.

Is it OK to use an Acrylic Lacquer Clear coat over a Urethane Base Coat? Or will it lift/peel/bubble?

I had to get a different hood and bumper after having a little accident. The car is red and the hood and bumper are white. I need to sand down the parts and paint them. The website I am going to get my paint from it http://www.automotivetouchup.com and I guess it is ok to use lacquer over urethane...because that is all they have. But can anyone tell me if that is REALLY ok or not? if you can help me out...thanks a lot.Is it OK to use an Acrylic Lacquer Clear coat over a Urethane Base Coat? Or will it lift/peel/bubble?
Lacquer clear works great over urethane base coat.We tried that as an emergency while working on used cars years ago.It gave excellent results and lasts as well as anything else.We still do that at times because the lacquer clear,when wet sanded and highly polished,looks and lasts great.It's also much cheaper.Is it OK to use an Acrylic Lacquer Clear coat over a Urethane Base Coat? Or will it lift/peel/bubble?
lacquer paint is not compatible with urethane paint. period.
call dupont

microsoft word>

I am looking for a quick drying clear glue for a project that I can use in place of slower drying acrylic med.

this is for a scrapbook page that is a little more artsy than I usually do. If I am to teach this in 2 hours I really need a clear fast drying glue. ThanksI am looking for a quick drying clear glue for a project that I can use in place of slower drying acrylic med.
Use Omc Dark slipper Glue. It works.I am looking for a quick drying clear glue for a project that I can use in place of slower drying acrylic med.
how about supper glue,it is realy good on anything.
Try Tackie Glue. You can purchase at craft stores.
the glue you should use is called E600 they have it at any ';Micheals Arts and Crafts'; store.





You can use on just about anything, drys clear and fast.

Clear Holes in Acrylic?

Hey all,





I have just drilled holes in the sides of my acrylic for the leds in my ftir touch screen attempt, but the insides of the holes are pretty opaque, and don't transmit much light. How can I make the acrylic clear inside those holes? I've tried adhesive sandpaper around a dowel, spinning in the drill, like a getto dremel, to no avail. Ideas?





Thanks!





--Legs





P.S. not strictly engineering, I realize, but this is the closest category I could find...Clear Holes in Acrylic?
Polishing is a process of using progressively finer grits. First start with something a little coarse (100 or 200 grit) and then halve the grit at each step (200 -%26gt; 400 -%26gt; 800 -%26gt; 1600). Above 800 or 1600 grit, you will be using a polishing paste, not a paper. To use the paste, you apply it directly to the tool, or to a fine cloth.





The holes are probably small, so bending paper around a stick probably won't work too well. You may just have to start with the coarsest paste you can find.





Since these are holes, you may end up burnishing them with a brass or glass rod. Burnishing is different from polishing, in that it uses pressure to smooth down minor rough spots. But the surface needs to be almost smooth to start with.





Another thing you might try are these CD/glasses repair kits. A few of them are acrylic resin, but most are actually a liquid wax with a refractive index close to acrylic. They usually make a very smooth surface. Many of these kits are 2-step. The first being a medium polishing compound, and the second being the wax.





Edit--





Using acetone to polish acrylic is called ';solvent polishing';. There is also a polishing method that uses heat called ';heat polishing';. Both of these polishing methods impair the structural stability of acrylic and can lead to crazing, which is the fracturing of the acrylic starting near the polished point or edge.





Also, what they didn't tell you in ';How It's Made'; is that the acetone bath is actually a saturated solution of polymethylacrylate in acetone. It doesn't polish the handle, as much as it leaves behind a smooth film of new acrylic when it dries. Then again, I guess they could have been straight up solvent polishing the handles. I have certainly used cheap acrylic screwdrivers that started fracturing for no apparent reason.Clear Holes in Acrylic?
Acetone on a q-tip will melt the whiteness from the hole leaving it water clear and shiny. This will be a lot easier than trying to polish the hole until it is shiny. I saw this done on the show How it's Made. Screwdriver handles made of acrylic were being dipped in acetone to restore the clearness and gloss after a turning process made the outer surface white.





Edit: Wow, someones insecure about their answer! If you want the ten points so bad, fine, you can have them. All I ask Legs is that you try my suggestion on a scrap and see what you think before you waste a bunch of time and money.

Anyone know where I could get Weld-On #3 to bond acrylic in Houston, TX preferably near Clear Lake?

I've checked Lowes and home depot online... and I didn;t get anything by searching this but maybe I'm searching wrong....Anyone know where I could get Weld-On #3 to bond acrylic in Houston, TX preferably near Clear Lake?
Google ';hardware stores near clear lake texas'; and phone first

Is there a clear flame-retardant coating I can use on acrylic sheet?

The acrylic sheet is going to melt at about 130掳 C, so coating isn't going to do much for you. If you need flame resistance, you need to look for a polymer designed for those conditions.

What is the difference between a fullset nail, fiberglass, gel, clear, and acrylics?

I want to get my nails done but i don't know which one i should do and what's the difference between them.. help?What is the difference between a fullset nail, fiberglass, gel, clear, and acrylics?
Heyy.


I get my nails done all the time and choose acrylic.


There isn't really such thing as gel and clear; not very different is what I mean.


Acrylics VS gel; acrylics and gel are basicly the same thing! Acrylics are liquid and powerd and gels don't need mixing; they get dried or whatever by using U.V Lights.





Acrylic nails ar way more stronger and natural looking rather than the GEL! So that's why I prefer acrylic nails...good luck choosing. :D





Hope I helped! 鈾?br>

If you have any more questions just message me at inlovewithmarcusw@yahoo.com, i'm an expert in BEAUTY! ^.^What is the difference between a fullset nail, fiberglass, gel, clear, and acrylics?
Hey, just get a full set of acrylics


nothing else is worth your money :)


And yes unfortunately your nails will probably be dry and weak once you take them off, but nails grow out so its worth it :)


x





And btw, gel is meant to be better for your nails health but its just a scam because they just put it on top of acrylic, meaning absolutely no difference at all

Differnce in clear, and pink acrylic powder (for nails)? See details..?

A website with pics would be nice but I can't seem to find one. Which color acrylic is most commonly used for a french manicure and would look most ';natural'; when polish isn't used?Differnce in clear, and pink acrylic powder (for nails)? See details..?
Both clear and pink powder can be used.


i prefer pink though.


and if you aren't going to use polish


i'd definately say pink..


but you are going to have to use polish for the tip


unless you want to try pink an white acrylics


which require no polish


and the white will never fade





I NOTICED YOUR ADDED DETAILS AND.....





if you want the look of a french mani without having to paint/airbrush or use white acrylic..use whte tips...they'll look very nice...but if you plan on paintin the nails..use clear!Differnce in clear, and pink acrylic powder (for nails)? See details..?
I don't know a website for this, but w/ a good manicurist, clear is best. a person who doesn't know what they are doing will make your nails look cloudy, or even slightly grayish, so check out their work b4 you let them do your nails. some places use a really good flesh tone pink, and sometimes this will look more natural than a clear powder, but you really have to go to the place and see the quality of the work

microsoft word>

Why did my acrylic clear coat act so funny?

Well i was spray painting my small plastic shelf and did a primer coat. followed with a black gloss. Then i decided to add a clear coat. I got an acrylic clear coat and sprayed an even layer on the shelf. On a fist sized spot on each shelf it looked like the clear coat raised up in tree branch-like shapes. idk how to explain it. its like wrinkles rose up out of the paint(no cracks, it just rose) in treebranch-like manner. whats up with that? looks ugly now..Why did my acrylic clear coat act so funny?
Check your cans of spray paint. It sounds like possibly your black was oil-based, and the acrylic did not adhere to it. Or maybe it wasn't dry enough to be clear coated. Or perhaps maybe a place you touched it to move it and the oils from your hands caused the failure.Why did my acrylic clear coat act so funny?
Sounds like **** ran brah, your clear coat could have run or one of the paints under it could have and when you put on the clear coat it could have magnified it, know what I mean?

Crystal/Glass/Acrylic Clear Beads' Curtains...?

Hi, I am looking for these decorative clear crystal, glass or acrylic beads strung together with small steel rings. Pictures as below, which was taken from Fashion Bar in Clarke Quay, Singapore:





http://img2.freeimagehosting.net/uploads/526fc75c7d.jpg


http://img2.freeimagehosting.net/uploads/38dbbff220.jpg


http://img2.freeimagehosting.net/uploads/063e7d2353.jpg





Really ordinary-looking, but damn hard to find in Singapore! Anyone has any idea? I need them to be properly chained-up in length of about 1.9m to 2.0m, and easily hundreds of strands of them, so as to decorate my wall of width 2.4m.Crystal/Glass/Acrylic Clear Beads' Curtains...?
Have you tried eBay for the beads. eBayers ship all over the world and you might be lucky to find the exact beads. The joining circles can be purchase at your local hardware store. All you would need to do is ring them up to proper length.

Putting acrylic/clear balls on jewelery for still kinda fresh piercings?

I was wondering if I went to a piercer and had him/her change the balls from the silver that came with my curved barbell in my conch to clear, would it be ok/worth it? I have had some people (teachers, boss, etc) make negative comments and mention a retainer but a clear ball that wouldn't attract as much attention is the only thing that I could do until June. I got the piercing done 12/2/08 and my piercer said I can't change out until 6/2/08. What do you think? Will piercers do that? I really only need the one that is on the front/visible part of my barbell in my ear changed, the back is fine, nobody sees it.Putting acrylic/clear balls on jewelery for still kinda fresh piercings?
try glassPutting acrylic/clear balls on jewelery for still kinda fresh piercings?
I wouldn't see why not...I wouldn't go with acrylic though, but I am sure they will have a ball that is clear that isn't acrylic.





Go talk to your piercer and find out for sure...or just call the place.

Does anyone know of a clear flat surface (specific type of plastic?)that acrylic paint will peel off of?

Acrylic plexi will not work. I have used Polyethelene(shipping plastic) and Polypropylene(tupperware), but have been unable to locate flat clear sheets of either Can you suggest a supplier?Does anyone know of a clear flat surface (specific type of plastic?)that acrylic paint will peel off of?
Glass. Using plexi isn't good because it's a type of plastic and so is acrylic paint--they are going to want to bond to each other. Use glass.Does anyone know of a clear flat surface (specific type of plastic?)that acrylic paint will peel off of?
look in your yellow pages for plastic manufacturers,, you want to find a vacuum form molder, they will have sheets of various plastics,,, also there are several types of silicone sprays in the industry you could try to lightly spray onto your surfaces, some sprays are made to be non paintable (paint wont stick), some sprays are paintable ( paint will stick), have you tried glass?,
I have had some success with stencil plastic, but sometimes the edges get rough when I peel it off. Glass also works.

In search of an acrylic (clear) stamp manufacturer.?

In search of an acrylic (clear) stamp manufacturer. I don't want rubber stamps.. I like being able to see through the stamps.In search of an acrylic (clear) stamp manufacturer.?
We are easily able to make clear polymer stamps from your artwork, and they can be mounted or unmounted as you choose. Turnaround is only a day or two and prices are very reasonable. Check out our Yahoo user group at http://groups.yahoo.com/group/amazing_ar鈥?/a> or check out our website at http://www.amazingarts.biz or find us on eBay as user amazing_arts. Good luck! Amazing ScottIn search of an acrylic (clear) stamp manufacturer.?
Heaps of links at this site Maybe one that will make stamps for you.


http://www.erubberstamp.com/resources1.h鈥?/a>





This company may be able to help you:


http://www.laser-4-u.com/ie/
Try ebay.com and yahoo.com. Do searches for clear acrylic stamps. And these ought to get you started on the right track:





http://annalmolina.myctmh.com/WebSites/Templates/MyCTMH/Template1.aspx?Reload=Yes





http://www.stampandscrapcanada.com/clearstamps.html





http://www.paperosity.com/rustypickle3.html?OVRAW=clear%20acrylic%20stamps%26amp;OVKEY=acrylic%20stamp%26amp;OVMTC=advanced%26amp;OVADID=5705975012%26amp;OVKWID=61823183512





http://www.scrapthatsmile.com/index.asp?PageAction=VIEWCATS%26amp;Category=1764





http://www.rivercityrubberworks.com/index.cfm?fuseaction=category.display%26amp;category_ID=49





http://www.purrfection.com/stamps/index.htm





http://www.scrapbookcentralonline.com/
This is all you need, I promise...


http://www.sundayint.com/
You can purchase acrylic stamps from Close To My Heart, an independent consultant company. There website address is: http://www.closetomyheart.com/





A couple of clear stamp manufacturers are:





Autumn Leaves


Heidi Swapp


Sassafras Lass


KI Memories new line Love Elsie (Hobby Lobby)





If you have a Hobby Lobby near you, they have a lot to choose from. If now, there are numerous online sites that you can purchase them from.





If you need anymore information, just let me know.





Jess

How do I remove blue protective film covering from my clear acrylic basketball backboard.?

Previous owner never installed or mounted this Porter Official size (6' x 3.5') clear acrylic basketball backboard and also never removed the blue protective film. I just purchased it from him for $50 (original price $1000+). I have been carefully scraping away with a razor; I have tried ammonia, bleach, mineral spirts, Goof-off, 3m adhesive release agent, soap/water, fire (grill fire starter), steel wool (too abrasive). I haven't tried steam or a heat gun. Any suggestions?How do I remove blue protective film covering from my clear acrylic basketball backboard.?
The problem here is that the two aren't that different molecularly. Heat gun and steam could deform and fog the acrylic backboard (low melting point). Anything that would dissolve the plastic covering would get the acrylic (actually, the covering might be slightly more resistant). The only thing I can think of that might help is to allow it to be bombarded by UV (ie: leave it in the sun). The covering might get brittle enough to flake off. Past that, good old elbow grease and time will eventually get it off.

microsoft word>

I am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?

I am looking for a clear acrylic solid pool cover with truss system, dance floo.rI am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?
PLEAT INC Has a pool truss dance floor it is awsome I saw it at a wedding. they have it for rentals and I think to purchase. their website is pleatsystem I thinkI am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?
Timb is right...link below. Neat system.

Clear, acrylic computer cases?

Can someone tell me a little more about those clear acrylic computer cases? I think they look really awesome and might eliminate some ESD problems. I want to get one but I don't know how practical they are or if I'll get sick of half of my room glowing blue all the time. Thanks for the help.Clear, acrylic computer cases?
I thought about getting one of these but never did as for ESD I believe the Electronics is what is going to cause the problem and the conditons of your enviorment and so on yada yada yada ! Heres a link for some cool cases. The light is also a concern if its going to be keep where you sleep I hate any light, my room has to be pitch black for me to sleep :) ooooh another thing is you need to wire everything nice and neat to as you'll see everything !


http://www.crazypc.com/products/clearcas鈥?/a>

Will ';Clear Acrylic Sealer: Gloss'; spray ruin my oil paintings?

This is the product:


http://www.plaidonline.com/productDetail.asp?itemID=CS200304





Does the title mean that it is to be used for acrylic paint or that it is made from acrylic?Will ';Clear Acrylic Sealer: Gloss'; spray ruin my oil paintings?
';This easy-to-use spray protects paint, lacquer, varnish, stain, glue, wood, prints and other surfaces WITH a strong, clear, non-yellowing, ACRYLIC SEAL.';





Yes, it is made from acrylic. But I don't think you should use this to seal your oil painting. There's varnish or something that you can buy to I think paint on your paintings to seal them. I've never sealed any of my oil paintings before since I don't really know...what to do... so I hope someone more knowledgeable can help you.Will ';Clear Acrylic Sealer: Gloss'; spray ruin my oil paintings?
yes it would ruin it





use a removable varnish intended for oil paintings only





like soluvar or kamar ,damar , etc...





oh and make sure the painting has aged in a dust free environment for 6 months before varnishing.





dust it with a soft brush first to make sure

I recently got my lip pierced and i need to wear a clear for my job which is better to use plastic or acrylic?

and if u have comments such as ';ew nothing'; or ';lip piercings are gross'; dont bother i need advice not put downs!!!!!I recently got my lip pierced and i need to wear a clear for my job which is better to use plastic or acrylic?
I had the same prob as you


pesonally i prefer plastic i think it looks better and you can get more styles


(not that you can see them anyway)


but dont forget to use anti-bacterial sprays and stuff coz if it gets infected it will look terrible with a clear one inI recently got my lip pierced and i need to wear a clear for my job which is better to use plastic or acrylic?
Acrylics/plastics don't cause infections per se, however they are porous materials that can harbor bacteria and are not suitable for unhealed piercings.





Your best bet would be to buy a glass retainer and keep them in until you're healed. Constantly changing out jewelry will only aggravate your new piercing and increase your chance of infection.





Also, since you have an open wound I would suggest taking your new glass jewelry to a local shop and have the piece(s) autoclaved as you never know who has handled the jewelry.





https://www.bodyartforms.com/products.as鈥?/a>





http://www.glasswearstudios.com/webpages鈥?/a>





The quartz glass on the BAF site is actually from GWS, but I thought I'd link you to both since GWS offer more retainer options on their site.
Neither get quartz. They are SO much better for healing. Plastic just doesn't sound good and acrylic will harbour bacteria which can cause infection if not cleaned a lot. Quartz is definately the best choice.
acrylic

When applying the top coat with acrylic do i use cutting compound before i apply the clear coat?

i have spray 3 coats of metallic top coat and now i want to know if i use cutting compound after or before the clear coatWhen applying the top coat with acrylic do i use cutting compound before i apply the clear coat?
hope this link answers your question http://ezinearticles.com/?How-To-Cut-and鈥?/a>When applying the top coat with acrylic do i use cutting compound before i apply the clear coat?
Try to visit http://www.hflaser.com, I hope it helps.


Information, Services of Vinyl Cutters, Laser Engravers and Laser Cutters.

Report Abuse

Will applying pink and white acrylic over clear cause it to turn yellow?

noope


cute idea


good luck


-alex(:





have a great day:]Will applying pink and white acrylic over clear cause it to turn yellow?
Nope , it shouldn't =]

microsoft word>

Why is it that strippers wear those giant clear acrylic platform heels ..is that sexy to men?

I just simply want to state that I feel bad for society with so many people asnwering this question closed-mindedly.





And as for the question, they wear them because high heels arch the back, lift the butt, slenderize the legs, make them look taller,.. all the things that men ';say'; they find attractive in a body. They're taller than normal heels, yes. And they're clear, yes. It just gives a better illusion of long legs and added height.





And people, if you want to make fun of those kinds of shoes.. look at what children are wearing to dances now... the same exact things that they can now buy at Deb or some other such stores in the malls. Criticize what you know, not what you're so afraid of.Why is it that strippers wear those giant clear acrylic platform heels ..is that sexy to men?
I am a man and I don't think that kind of shoes is very sexy. The strippers must think so I guess.Why is it that strippers wear those giant clear acrylic platform heels ..is that sexy to men?
bc they want to look skanky..and men want that for cheap hookup nights, not long-term gfs.
no- and i'm still wondering why beauty pageant contestants and strippers wear high heels with bathing suits.
Chris Rock already commented on this.
okay first not all of us wear those, just some of us, i prefer a black stelleto heal, just depends on what you are wearin on stage depends on the shoe, not all wear the clear shoes
My friends and I dont think its sexy. I dont know why they wear them. They look silly...
well it works.. so i guess it is
They look incredibly cheap, and yes cheap is sexy to guys who want sex and nothing else. Pay no attention.
Same reason a chef wears that goofy hat. It's part of the uniform. Besides a good majority of strippers are not that tall. So they wear those shoes because they give not only more height, but those particular shoes give more stability at those heights. Plus, yes they are, cheap, trampy, whoorish, and SEXY
hell yes.
To each his own,but that soesn't do a thing for me.

Where can I buy Clear Acrylic Photo Blocks?

in New Zealand or on the WebWhere can I buy Clear Acrylic Photo Blocks?
In New Zealand I have no idea. But I can tell you who makes these or who makes plastic blocks that would work. When you do your searches try looking for 'fabrication' companies or 'plastic fabrication' companies. I've used several in LA over the years, one of which, called 'Cadillac Plastics' is still around.





The sell plastics in any sizes and colors, including clear. And they sell plastic resin if you wish to make your own.Where can I buy Clear Acrylic Photo Blocks?
If you don't want to go outside NZ, try http://www.artofthisworld.co.nz/product.cfm?ID=72%26amp;Type=1





A friend has had several of her own photos done, and they come out really well - 9 cm square, cost $25.

Could you tell me what clear tar gel is just started painting with oil and acrylic on canvas?

i have bought a pack of paints and with it was gel mediums cleare tar gel transparent gel. what is it used for and how do i use it .Could you tell me what clear tar gel is just started painting with oil and acrylic on canvas?
It is used to form raised shapes in acrylic or oil paintings. Tar gel is usually very thick and viscous. This link is to an art supply house I use frequently. It takes you to the description of the gel and it's uses.





http://www.danielsmith.com/search.aspCould you tell me what clear tar gel is just started painting with oil and acrylic on canvas?
Because signals are easily receved near towers.

I just started doing my own acrylic nails and when im done i try to put clear nail polish over them to make?

them glossy but the acrylic seems to obsorb the nail paint? what should i do?I just started doing my own acrylic nails and when im done i try to put clear nail polish over them to make?
let them dry. or put water on them, if they mess up make em again maybe you made them wrongI just started doing my own acrylic nails and when im done i try to put clear nail polish over them to make?
you need several coats, one coat alone is NOT enough, acrylic nails do somehow absorb the polish after you've filed them, but i'd just say put more coats
Use a good quality base coat before applying the polish.

What does clear 1/2'; thick acrylic cost per square foot?

I have no real clue, and mean no offense; but wonder why so many don't go more direct? WWW is obviously something accessible. Browser box , then Keyword search.





Clear at 1/2 inch; such as for security purposes; convenience store windows to the cashier/ BANKS at 1 inch; etc; is expensive.

Where can I buy a clear bent glass, perspex, acrylic or plexiglass coffee table for under 拢100?

At the end of last year you could buy one from Matalan for about 拢30.





Or you could try placing a wanted ad on your local freecycle group and then if someone wanted to get rid of one it would be free!


www.freecycle.org.uk.


Then find your local group and away you go!


Hope you find it!Where can I buy a clear bent glass, perspex, acrylic or plexiglass coffee table for under 拢100?
Have you had a look on ebay? Usually good for slightly unusual things or for getting fashionable items cheaper.Where can I buy a clear bent glass, perspex, acrylic or plexiglass coffee table for under 拢100?
Yes e-bay is a good answer , any local auctions where you live could be another.
E-bay. Put Retro into your search.





Yep, that did it. There is one on there for 拢99





also look at www.embarkdesign.co.uk

microsoft word>

Have a solid acrylic nativity-used to be clear-has yellowed. Is there any way to restore it to clear again?

This acrylic set is solid acrylic. Should be fully clear. Has yellowed a bit with time. Is there a liquid solution or something else that can take out the yellow and restore it to its original clear state? Will appreciate any suggestions!Have a solid acrylic nativity-used to be clear-has yellowed. Is there any way to restore it to clear again?
No, I'm sorry, but once plastic (acrylic, etc.) has yellowed, there is no way in which you can bring about the clear again.





Anyone who recommends anything is wasting your time, giving you false hope. Sorry --Have a solid acrylic nativity-used to be clear-has yellowed. Is there any way to restore it to clear again?
I don't know of anyway to get the yellow out. If I were you I would repaint if myself. You can get really creative and have fun too. Dry some dry brushing or different technique.

Need to put good clear coat on acrylic paint.?

I just painted my paintball equipment with acrylic crafts paint but I need to put something on it that is clear and will make it not scratch easily. Last time i tried to clear coat something the clear coat stuff made the paint i put it on come off and worked just like paint remover. I need to know what type of spray on clear coat will be the best and not mess up the paint..





I want something under 20$Need to put good clear coat on acrylic paint.?
clear gesso paintNeed to put good clear coat on acrylic paint.?
Non-yellowing polyurethane...available at any home improvement store.

Where can I find some clear acrylic for free? (Looking for scraps.)?

Looking for what vendors use acrylic so I know where to ask or if you have any other idea. Thanks.Where can I find some clear acrylic for free? (Looking for scraps.)?
When the store cuts the acrylic for a customer for it to be the right size, they probably have some scrap left over. Do you think maybe a hardware store carries acrylic? Check the phone book or internet for stores that sell it in your community.Where can I find some clear acrylic for free? (Looking for scraps.)?
try sign shops or glass shops.
beauty school is the only place where i got acrylic for free hunny
You will never, AND THE ROCK MEANS NEVER FIND ACRYLIC FOR FREE!!!!!!! IF YA SMELLLLLLLLL, WHAT THE ROCK..




















































































































































































































IS COOKIN';

How hard is it to paint a car midnight blue using Acrylic Enamel base and clear coat?

I want to paint my truck midnight blue myself,I have the paint gun and air compressor but if I spend almost $300 on paint I want to know how hard it is to do this color without messing up so all that money isn't wasted..How hard is it to paint a car midnight blue using Acrylic Enamel base and clear coat?
well you can use acrylic enamel base and clear coat but there would'nt be much point, either use acrylic anamel or base coat clear coat. If you make a mistake in the clear like a run you can wet sand it and polish. Where as the other type of paint your playing with the metallics .How hard is it to paint a car midnight blue using Acrylic Enamel base and clear coat?
Have you ever done it before? Have you ever watched someone do it before? Im guessing you haven't, so it will probably not be as easy as you think. Do in indoors, or if you have to do it outside, make sure it is a sunny clear day with no wind. Mask off everything that you do not want to get paint on. Make sure u wash the truck before you paint it.

Does anyone know where I can buy clear liquid acrylic resin in the U.S.?

I am using it for a project, and I only need SMALL amounts, like in pints or something. I only found 1 place on the internet so far, and you have to buy it by the gallon!Does anyone know where I can buy clear liquid acrylic resin in the U.S.?
MuchLuv4... In California (and Oregon / Washington), I buy all my acrylic (liquid %26amp; sheet) at TAP Plastics http://www.tapplastics.com/shop/category鈥?/a> , though I HAVE seen it in Home Depot Stores.





I'm having trouble doing a simple search for the product on the internet... at a retail level, all I get are distributors:





http://www.struers.com/modules/contact/d鈥?/a>


GOOD LUCK Again... Keep that Clover Safe !!Does anyone know where I can buy clear liquid acrylic resin in the U.S.?
Google might help;





http://www.google.com/search?q=clear+liq鈥?/a>





http://www.google.com/search?q=clear+cas鈥?/a>





Hobby Lobby assoc. site;





http://www.craftsetc.com/store/item.aspx鈥?/a>





http://www.google.com/search?hl=en%26amp;clien鈥?/a>





http://www.michaels.com/art/online/displ鈥?/a>

Can I protect acrylic lacquer paint with acrylic enamel clear coat finish?

I'm painting my motorcycle fairing using primer, duplicolor acrylic lacquer paint and duplicolor acrylic enamel top coat will that hold or do I need to use a lacquer top coat as well?Can I protect acrylic lacquer paint with acrylic enamel clear coat finish?
You would do better by using clear acrylic lacquer on the finish by keeping all the mediums the same. But, you can use enamel over top of lacquer. You can't use lacquer over top of enamel.It will wrinkle the finish of the paint.

microsoft word>

How do I remove dried acrylic paint from a clear plastic pallet?

My favorite pallet has dried acrylic paint on it. How can I remove the paint without damaging the pallet?How do I remove dried acrylic paint from a clear plastic pallet?
I've been using old plastic cafeteria food trays (the ones divided into sections) for years as my pallets. Removing the dried out leftover acrylic paint is easy, at least in my case. All I need to do is catch a side of the dried paint (usually just a fingernail does the trick) and peel it up. If you don't want to use a fingernail something like an old butter knife will do just as well. Or even a pallet knife. All you need to do is get the blade under the edge of the dried paint and life it up slightly. Then you can simply peel the paint away from the pallet.How do I remove dried acrylic paint from a clear plastic pallet?
Soak it in the sink- the acrylics will peel off with a little help from you. Then you don't have to scratch it all up---
Scrape it off with a razor. That has to be carefully done but it is about the only way to get rid of the paint. Acrylics are a plastic and once they set there is nothing that will dissolve the stuff.


Regarding your pallet I would say the you will have to carefully scrape it off with a wide razor sharp blade.
What the other two said :) You can take those acrylic scraps and use them for collage. Just use some matte or gloss medium to adhere them to your surface.





Lynne
Acrylic should just peal right off if it is plastic??? Perhaps it is wood.?. Rubbing alcohol will dissolve acrylic paint eventually. That is how re-modelers check to see if you have oil based or acrylic paint on your wood trim in your house...or they SHOULD. You could also try a stripper.
I pour boiling water over it and let it soak overnight. It peals off in one nice chunk. Kinda fun to do too...
either scrape it up or fill it with water and let it sit for a day or two and then it should just come right off.

What is clear acrylic sealer ? And what could it be used for?

Clear acrylic sealer is sort of like a clear, shiny paint. It can be used over paint as a sealant to keep it protected from the elements. It can also be used in crafts such as pottery in order to seal the final product and give it a glossy appearance.What is clear acrylic sealer ? And what could it be used for?
Clear acrylic sealer has many uses:





1. Added to acrylic-latex paint= Improves adhesion to chalky surfaces. Use 1 part waterproof/sealer to 20 parts acrylic paint, OR 1 qt. to every 5 gal. paint





2.Used as a water sealant over porous/ non porous material- brick, masonry, vinyl and alum. siding, brickwork. Dries 1-2 hrs.





3.Used on painted/ unpainted surfaces, it insures water- tight finish, also primer for alum. siding.





4. Interior brick wall sealant.





5. Used over acrylic paint prevents ';chalking'; affect-





Hope this helps ya !What is clear acrylic sealer ? And what could it be used for?
It is used as a finishing Top coat on many different things...It could be the stain used on your new wooden porch or it could be the final coat on your nails to seal polish in.





You can also smell it for a while to catch a buzz.
I couldn't find anything on Wikipedia, so I found info on a site that sells sealers.





http://www.epoxysystems.com/acrylic.htm
used to protect painted and stained wood surfaces.


clear: see through


acrylic: water based


sealer: protectant

I am Looking for a magnetic wand toy with a horse jumping it was in a clear plastic or acrylic box?

I had it as a child in the late 70's or early 80's and i think we got it in solvang ca.The bottom of the box was green like grass and the top was clear. you used a magnet to move a white horse over jumps. If any one knows where I can find this game/toy or has the resourses to make one PLEASE :';%26lt; Let me know.I am Looking for a magnetic wand toy with a horse jumping it was in a clear plastic or acrylic box?
I had one as a kid also, but I got it at a specialty shop called ';The Toy Quest';. You might try specialty boutiques to look for one.I am Looking for a magnetic wand toy with a horse jumping it was in a clear plastic or acrylic box?
Beats me ..But whats wrong with etch a sketch%26gt;??


You can make your own picture baed on the same principles


but you cant make it animate.Then there was ';wooly bill';


(I think)that was its name,that was very cost efficient


It was a face and you took the magnet and decorated his face with a beard ect.Then there was that driving toy.


I dont recall what it was called but it was driving


a plastic car on a board with magnets...Magnets are such


fun you can make your own horse ect with strong magnets


crushed ect and make your own.That toy I have never heard of?But I do know of many.Are you sure your not confused with a dream ?Because there are no simple magnetic toys that can animate unless they were digital or electronic?

What Does A Mammoth 98872 Clear Acrylic 72 Inch In Ground Basketball System Have To Mounted to?

I suggest that you contact the manufacturer and ask them for a recommendation.What Does A Mammoth 98872 Clear Acrylic 72 Inch In Ground Basketball System Have To Mounted to?
prpbably concrete

Clear acrylic circle to make keychain?

I am looking for a clear acrylic key chain that can be monogrammed with vinyl lettering. Does anyone know a website that sells these?Clear acrylic circle to make keychain?
Don't know of a website but you can buy them by the thousands from ';plastic'; stores. Maybe there is a store near you that manufactures plastic items.

I have a CF hood that I am clearing. I am using acrylic clear. Do I need adhesive promoter?

Last time I used acrylic it dried rough and it wasnt smooth. the only clear I can find is acrylic. It could have been too hot and I might have not sprayed enough/too far away. Should I use adhesive promoter or what should I use?I have a CF hood that I am clearing. I am using acrylic clear. Do I need adhesive promoter?
I'm assuming you are painting over a painted surface already coated with a urethane so yes, use an adhesion promoter because polyurethane coatings have terrible recoat properties. Pick an adhesion promoter that is recommended by the manufacturer of the paint you are using. Also, remember to paint in a low humidity environment.





If you really want it to look good, take it to a paint shop like maaco or something and have them spray it with a clear coat of polyurethane. Acrylic lacquer like what you're about to use will disintegrate (cracks, yellowing, etc...) in a comparatively short period of time.

microsoft word>

Acrylic Tubing...Is there a retail store around Dallas,TX that sells acrylic (clear plastic) tubing?

That is similar to the white PVC pipe, but clear. It would be great if the hardware store PVC fittings would fit to it also.Acrylic Tubing...Is there a retail store around Dallas,TX that sells acrylic (clear plastic) tubing?
most hardware stores sell it on the rolls and can help you find the fittings depending on what your wanting to hook it up to. check at a local ace hardware good luck :0)Acrylic Tubing...Is there a retail store around Dallas,TX that sells acrylic (clear plastic) tubing?
Usually not at your local stores. Try usplastics.com, they ship.

How can I form a clear plastic, acetate or acrylic, to make boxes to enclose collectibles?

I got lots of old toys (dolls, cars, action figures) big %26amp; small collectibles which I would like to preserve in clear plastic enclosures. These items if enclosed, would be kept from dust and insects, and would give them a longer self-life. These would also serve as decorative piece, can be displayed in your living or bedroom or somewhere inside your home you found appropriate.How can I form a clear plastic, acetate or acrylic, to make boxes to enclose collectibles?
You may also wish to purchase acrylic cases in different sizes for your collections.


http://www.misterplexi.com/dollcase.html


.How can I form a clear plastic, acetate or acrylic, to make boxes to enclose collectibles?
I think that WayMoreParsec has headed you in the right direction if you want to make you own boxes.





Here's some further information on the glues used with acrylic:


http://www.craftics.com/products.cfm?Cat鈥?/a>
There are books on this. See-Vacuum forming.


Also clear acrylic sheet (at hardware store) can be cut, sanded, and glued to make sturdy cases. Accuracy of the fitted pieces is imperative!

Taking care of clear acrylic furniture?

How am I supposed to clean clear acrylic furniture? It looks horrible when it gets badly scratched!Taking care of clear acrylic furniture?
Acrylic is a very delicate material, which needs specific care in order to maintain its beauty. Use only a very soft damp cloth when cleaning your product. Use of chemicals or harsh abrasive products (Windex ....) will result in damage. Absolutely no chemicals or cleaning products should be used!





Like all products, it is very important to use the proper cleaning solution to keep your acrylic furniture looking beautiful. We recommend Novus Plastic Polish #2 or Clean master Brillianize. Be sure to apply enough to the cloth and the acrylic surface.





Scratch Removal:


Like other fine surface's acrylic can scratch, but unlike other materials. Scratches on acrylic can be removed, by using Novus #2 and a cloth Purchasing a restoration kit can remove Deep scratches.





Caution: DO NOT use window cleaning fluids, scouring compounds, gritty cloths, household scouring compounds, lacquer thinner, benzene, solvents such as acetone, keep away from open flame or heat.





good luckTaking care of clear acrylic furniture?
There is a product you can get at a marine store/web site. It is called Mirror 17 and it works wonders on plastic to cover scratches and give a clear appearance. I used it on the plastic ';window'; of my convertible automobile and it instantly repaired the scratches to a brilliant shine. Good luck

Does anyone know where to get clear acrylic name plates?

clear acrylic measures 11'; x 3'; with a vinly over lay that measures 10-1/4'; x 2-1/4'; with black lettersDoes anyone know where to get clear acrylic name plates?
Trophy shops do that kind of work.Does anyone know where to get clear acrylic name plates?
IF YOU HAVE THE NAME PLATES ALREADY, JUST BUY CLEAR ACRYLIC SPRAY PAINT AND SPRAY TO PRACTICE, THEN SPRAY ONE PLATE, IF IT LOOKS GOOD SPRAY ALL THE REST AT ONE TIME.
Try this website http://www.miladisplays.com/acrylicnamep鈥?/a>
I do not know where you can buy them, but if you are real handy, should not be all that hard to make one.
yep, texas art supply,,, one of westheimer and one by baybrook mall

How do i clear up some cloudy acrylic?

My aquarium lighting sits on top of some acrylic that has gotten scoured,like someone tryed to clean it at one time with too potent of a cleaner.Would love to let the light thru all the way. Thanks!How do i clear up some cloudy acrylic?
A great product that will remoe the scrathes from the acrylic tank is a product called Novus #2. It will help you you big time and you should have your tank back to looking great again. It is only $5 , so not expensive. Heres the link: http://www.vikingmagiccompany.com/?nd=fu鈥?/a>How do i clear up some cloudy acrylic?
i do not know
If it was scoured, it's been scratched, creating the cloudiness. Perhaps one of those lens repair liquids that fill in scratches would be helpful. I'm not sure.
Sounds like it was cleaned with an ammonia based cleaner or some other kind of glass cleaner. Most glass cleaners cloud acrylic, and apparently there isn't any way to un-cloud it.


Edit: I've done this to acrylic by accident before so I thought I'd look it up to make sure there haven't been any new developments. Apparently, depending on the cause of the cloudiness, rubbing it with a paper towel covered in canola oil or cooking spray (Pam), has been known to clear it up.

Where can I buy clear acrylic snap in photo key chains in bulk in Canada>?

.Where can I buy clear acrylic snap in photo key chains in bulk in Canada%26gt;?
You can buy in bulk and they ship worldwide!! Hope this helps. :)





http://www.qlt.com/store/merchant.mv?Scr鈥?/a>Where can I buy clear acrylic snap in photo key chains in bulk in Canada%26gt;?
..

microsoft word>

Where can I buy clear french false acrylic nail tips?

Is there some kind of beauty store you could recommend in the san diego area? Keep in mind that i can NOT order online.Where can I buy clear french false acrylic nail tips?
Here it is http://www.amazon.com/gp/redirect.html?i鈥?/a>


Good Luck!Where can I buy clear french false acrylic nail tips?
If you want glue on nails, you can find those like anywhere... claires, walmart, even most dollarstores. If you want tips for arylic nails you can also but kits at walmart, and saly beauty salon. Hope this helps

Where can I buy clear french false acrylic nail tips?

Is there some kind of beauty store you could recommend in the san diego area? Keep in mind that i can NOT order online.Where can I buy clear french false acrylic nail tips?
Here it is http://www.amazon.com/gp/redirect.html?i鈥?/a>


Good Luck!Where can I buy clear french false acrylic nail tips?
If you want glue on nails, you can find those like anywhere... claires, walmart, even most dollarstores. If you want tips for arylic nails you can also but kits at walmart, and saly beauty salon. Hope this helps

Where can you buy 'clear nail acrylic' (cheap) ?

if you are in the uk, then bootsWhere can you buy 'clear nail acrylic' (cheap) ?
Check here:


http://www.amazon.com/gp/redirect.html?i鈥?/a>


You can find it.


Good luck!Where can you buy 'clear nail acrylic' (cheap) ?
Beauty supply shop - in my area we have Sally's Beauty
wal mart


walgreens


drug stores

How do u cut perspex / acrylic? (clear see through plastic, about 5mm thick)?

Using a very fine and thin saw blade or cutting disk. If you don't have the electric saw then you are going to go old fahion way using a hand saw.





Remember to wear a ';good'; dust mask. That dust is not good for your health.





Some acrylic sellers can cut it for clients if you ask.How do u cut perspex / acrylic? (clear see through plastic, about 5mm thick)?
fret saw and hack saws


read this link it has some very good information about perspex and its uses.


http://www.lucitesolutions.com/remote/vi鈥?/a>


How do u cut perspex / acrylic? (clear see through plastic, about 5mm thick)?
get an acrylic knife and a straight edge. most hardware stores sell them. 3-5 bucks. score it several times then snap it.

Where can I obtain a liquid acrylic clear polymer to spray over roofing tiles that will film to 1-2 mils dry?

the product I have in mind came from Bovelle homes in Australia which was used in an application in New Zealand on premium knotty western red cedar weatherboards. This product was amazing! It even held cut boards together without breakage after being cut from the wall to install an electrical meter box. This product is U.V stable, dries in 30 mins, can be applied wet on wet,and has a dried film thickness of about 1-2 mils per coating. It came in 20 litre pails (5 Gals). Anyone know of anything similar here in the U.S?Where can I obtain a liquid acrylic clear polymer to spray over roofing tiles that will film to 1-2 mils dry?
its called polyurathane, can be found at any hardware store,Where can I obtain a liquid acrylic clear polymer to spray over roofing tiles that will film to 1-2 mils dry?
try amesresearch.com

Do you think all high heels with clear-acrylic heels are stripper shoes?

I have one pair with acrylic clear stilleto heel but with no plattform and they look nice... What do you think?Do you think all high heels with clear-acrylic heels are stripper shoes?
i have a pair just like that...no, there not all stripper shoesDo you think all high heels with clear-acrylic heels are stripper shoes?
I have a pair and I think they're sexy but not at all stripper shoes.
no they are not stripper shoes. I'm sure they look nice and they make guys drool (like me)
They are ok...i'm a big heel fan, but not too keen on the clear heels.
Hey Darian, if you enjoy wearing them then that is what counts!


Don't worry about what ANYONE else thinks! I wear 5'; stilettos when my hubby and I go out on ';date nights'; with micro mini skirts. I don't care what anyone else may think, he enjoys seeing me in them and that is what counts! If they look nice, wear them!
not all of them look like stripper shoes
Yes, I agree but it doesn't mean they are.
fishnetts would go nice with those and a hot short mini
Just my opinion, but the only real ';stripper'; shoes....are shoes that are worn by a stripper. I mean if a stripper wears sneakers....then those are stripper sneakers right? I would not worry about what other people think, what you think is what counts right? If you like your shoes then wear them and enjoy them. And if someone says to you ';hey those are stripper shoes';...just tell them no, they are my shoes and I am a __________ (fill in the blank with your profession), not a stripper.
Yes, they look like stripper shoes, and besides that, they're ugly.

microsoft word>

Where can I find a clear red acrylic / plastic / lucite cube end table?

I saw in Target over the summer then it disappeared before I could buy it!It seemed like dorm furniture and they had clear and smoky color too.It was very modern. I am looking for similar or nexting anything like it or exactly it. cb2 had similar but not clear.....yes I have tried ebay ';want it now'; and no luck yet. : )Where can I find a clear red acrylic / plastic / lucite cube end table?
try ikea or scan.

Acrylic clear coat on bike turned out cloudy?

I painted my bike and when I put on the acrylic clear coat it dried cloudy and spotted in some spots. does this just mean that I have to wax and buff the bike? i really dont want to have to redue everything, do i have other options of fixing this?Acrylic clear coat on bike turned out cloudy?
sounds like there was to much humidity in the air when you painted your bike.that's why it clouded up on you, might be able to buff out if not will have to redo and the spots is probably air bubbles or water spots.or there might be dirt or wasn't clean in the area of the spots..Acrylic clear coat on bike turned out cloudy?
Sounds like the humidity was too high when you applied the clear coat.





You may get lucky and be able to sand and buff this out. I would allow it to dry a few days before attempting to repair it. It's messed up already so it's worth a try. If it doesn't work, unfortunately, you will have to sand it down and start over.





Good Luck

Which type of iPod case is better: silicone or clear acrylic?

I recieved a black 30gig iPod for Christmas and it's starting to get some minor scratches. I want to buy a case for it to prevent it from getting scratched up any farther. I can't decide whether to get a silicone case or a clear acrylic. I want something that will allow access to the ports and buttons/switches, protect the screen, and keep out dust and stuff that will scratch the iPod even more. Which type of case do you suggest? And if you can suggest specific brands/models of cases, please do.Which type of iPod case is better: silicone or clear acrylic?
I just bought an iSkin eVo3 for my 30 GB iPod and I highly recommend it. It's a little pricey at $34.95 but it's made of high-grade silicone with a hard plastic cover and offers excellent protection while still allowing accessibilty. It's definitely worth it! Here's the link to the Apple Store website if you want to check it out for yourself:


http://store.apple.com/1-800-MY-APPLE/We鈥?/a>Which type of iPod case is better: silicone or clear acrylic?
A full acrylic case will just end up suffering the same problems as the acrylic face on your iPod (though it is cheaper to replace the case than the iPod). I suggest getting a clear adhesive screen cover and a pretty much any silicone sleeve. One benefit of silicone over acrylic is that it'll also act as a shock absorber if you happen to drop it.
I think that the silicon one should be better.

Can i paint the clear acrylic crystals on my chanelier black?

yes sure, how about one side only so you can still look into them but they'll look black?Can i paint the clear acrylic crystals on my chanelier black?
Find a good paint to adhere to it so it wont rub off and can be cleaned easily. Your local craft store would have it.Can i paint the clear acrylic crystals on my chanelier black?
Sure. Just make sure they're very clean and use glossy black spray paint.
just do what u want..beside its ur money n life
I think Krylon makes a new spray paint that adheres to plastic. That should work. Any hardware store (and WalMart) should have it. I would use a glossy paint. Perhaps a VERY light spray of silver over the top would give it a sparkly look?

What kind of paint do I use on oak veneer & clear acrylic lacquer (Ikea furniture)?

I have those ';Malm'; chests of drawers from Ikea and I'm looking to paint them from their yellowish oak color to a dark chocolate brown. What is the easiest way to paint over oak veneer and clear acrylic lacquer?What kind of paint do I use on oak veneer %26amp; clear acrylic lacquer (Ikea furniture)?
A light sand on the lacquer one to two coats of Kilz primer and you are good to go with whatever paint you choose....oil based paint usually better for furniture as far as durabilityWhat kind of paint do I use on oak veneer %26amp; clear acrylic lacquer (Ikea furniture)?
Most interior woodwork looks best in an eggshell finish, as high-gloss paint can have a rather bleak, deadening effect. If your plan is to paint walls, ceiling, and trim, then it鈥檚 best to get the trim painted first, along with the room鈥檚 windows and doors. Paint woodwork in small sections. Keeping a wet edge to avoid lap marks.
Sand off the laquer or strip it off with laquer remover so paint sticks.

How do you get a clear acrylic case off an ipod?

hammerHow do you get a clear acrylic case off an ipod?
uh... take it off

microsoft word>

For layering my collage, can i put chine colle' glued with clear acrylic gesso over acrylic paint ?

the type of board that i'm using is a canvas board that's already primed.For layering my collage, can i put chine colle' glued with clear acrylic gesso over acrylic paint ?
It's perfectly fine to adhere those elements together just watch the air bubbles.

Can Krylon Crystal Clear Acrylic Coating be used on painted wood?

as far as i know it can yes. ive never used it but. know people who have.


good luck


:-)Can Krylon Crystal Clear Acrylic Coating be used on painted wood?
Yes, the wood needs to be properly prepped and primed with an oil based primer. Kiltz, Zinnser, are good primers. Follow directions and you will be very pleased with your results.Can Krylon Crystal Clear Acrylic Coating be used on painted wood?
as long as you give it a light scuffing with 4.0 steel wool first to give it something to adhere to

Will clear acrylic retainer be bad for my newly pierced earlobes?

i also use h2o ocean sprayWill clear acrylic retainer be bad for my newly pierced earlobes?
Yes acrylic is bad to have in fresh piercings. Not only will you irritate the fresh piercings [you should only change the jewelry when they're healed] but you'll leave them susceptible to infection. Acrylic is porous so harbors bacteria. Also, rubbing alcohol can break down acrylic, so don't clean that jewelry like that.Will clear acrylic retainer be bad for my newly pierced earlobes?
Yes. Acrylic is a porous material and not very sturdy, especially at a 20 gauge. They are also not long enough to accommodate swelling and are not implant grade material. The only materials suitable for a healing piercing are implant grade metals such as Niobium, titanium and a high-grade surgical steel. Some people can also use quartz glass with success.
I jus came from a tat shop a couple hrs ago because i needed to suggestions on hiding newly piercings for work..and they guy told me its not good to change out any new piercing cuz like ur ears need to get used to the piercing and start the healing process...he says when he take out piercings over and over to change them they can cause scarring possible rotting of the wound and/or infections. So i would say not really a good idea
New piercings should always use surgical steel. Plastic, acrylic, jewels and beads harbor bacteria. Until your ears heal use the surgical steel.

Acrylic Question: What are the ingredient to make Acrylic Clear Plastic and the best place to buy them?

Im looking for Acrylic ingredient and the place to buy them. Since I do not have laser to cut them perhaps I can just pore acrylic liquid to my mold. Custom Acrylic cutter are too damn expensive for me and some do not reply to my Acrylic request and Im tired of it.Acrylic Question: What are the ingredient to make Acrylic Clear Plastic and the best place to buy them?
Cutting through sheets of acrylic ';plexiglass'; is pretty hard to do except for straight lines.





You can use other things to simulate sheets (or shapes) of clear acrylic though... for example, epoxy resin, polyester resin, acrylic/polyurethane resin (usually a bit too dangerous for most hobbyists though), clear acrylic sealers like polyurethanes/acrylic mediums/floor polishes like Future/Mop'NGlo, clear embossing powders, clear fingernail polishes, etc.


Some of those will be less scratchable than others though, or not be UV protected so they'll eventually yellow with too much direct exposure to sunlight/etc, or won't harden quite as smooth as others, etc.





If you want to ';cast'; one of those materials in a removable mold, there are things you'll need to know about what kinds of molds will work, if releases are necessary and which kinds if so, which resins or other materials will work best, etc.





Generally, crafters and artists use *polyester resins* when casting in removable molds because they can be poured deeper than 1/2';. However, the surface of a polyester resin that cures *next to the air* may not be perfect, so the ';front'; of the cast item will be the area which contacted the mold while curing.





Epoxy resins will also produce a clear object (in a removable mold or in a permanent ';cell'; of some kind) or a clear thick coating, but it's not usually used to make things that will be deeper than 1/2';.


On the other hand, epoxy resins are better for lungs than polyesters, and they don't have the problem of the surface next to the air curing imperfectly.





Once those resins cure though, the can be carved and cut but with difficulty (then need to be buffed).





For much more info about using resins, and the differences between them, check out the 3 LINKS in this recent answer I wrote about resins:


http://answers.yahoo.com/question/index;鈥?/a>





HTH,





Diane B.Acrylic Question: What are the ingredient to make Acrylic Clear Plastic and the best place to buy them?
Tap plastics has just about everything plastics. They have retail stores as well as online store.


http://www.tapplastics.com/index.php?PHP鈥?/a>





I've made paperweights using the resin and hardener and bought their molds.
A good hobby store will have that. It is sold for embedding objects, say, to make a paperweight.





You can find online sources by searching for





liquid acrylic





at http://www.google.com/products

Does anyone knows how to construct a box made out of clear acrylic plastic (any size)?

I have a lots of old collectibles which I would like to preserve, like RC cars, dolls in international costumes, old model mobile phones, sets of coins, etc. by encasing them inside an acrylic clear boxes.Does anyone knows how to construct a box made out of clear acrylic plastic (any size)?
go to the hardware store and buy sheets of plexiglass.


you can cut it to size yourself or buy pre cuts. Buy a glue for plexiglass and just glue it together.

Does anyone know how to polish the edges of clear acrylic to make clear or transparent?

This can usually be done with acrylic strips that are at least 1/8'; thick, but no less. I believe the process takes at least six different steps to transform the cut edges of the acrylic to crystal clear. Does anyone know the correct proceedure for accomplishing this technique? If yes, please send your answers to: CreativeIdeas2006@yahoo.com


Thank you for your time.Does anyone know how to polish the edges of clear acrylic to make clear or transparent?
There are two ways. One is to ';Flame'; polish. A propane plumbers torch or a small hand held butane torch will work. It takes a bit of practice, and if you dont move along the edge fast enough you can catch it on fire or melt it. Stay at the tip of the flame.


The other way is to wet sand with silacon carbid sand paper, start with 100 grit about 10 strokes, then 320 grit 10 strokes then 600 grit 15 strokes, keep flushing your sand paper in water and keep the edge of the acrylic wet.


Then put a cotton buff wheel in a drill, put some white buffing rouge onto the buffing wheel(while its turning) then buff the edge making lite level strokes across it, about four or five times, you dont want to heat it while buffing so dont lay into it, and wait in between strokes to let the heat diapate. Last step is a clean new buff to take the grease of the rouge off and bring it to a super clear luster shine. If you heat it to much when buffing it gets a white mare, if so you will need to resand and buff.


In lou of a drill a place called caswell sells a nice 1100 speed standing buffer for about $150.Does anyone know how to polish the edges of clear acrylic to make clear or transparent?
i used to embed photos in acrylic to make key chains using an odd shaped plastic container and shaping it with a grinder when hardened, then buffing with a cotton buffer pad with rosin applied to it.


they looked just like crystals pendants.

microsoft word>

How to make a patio table top with clear acrylic, add postcards, palm leaves, etc & sealed with clear acrylic?

My glass table top broke. I want to replace it with a cut piece of clear acrylic and cover that with vacation, tropical fun stuff and pour a clear acrylic over top. Like the table tops in sports bars with the baseball cards, etc....... What can I use as the top, pourable %26amp; clear? ThanksHow to make a patio table top with clear acrylic, add postcards, palm leaves, etc %26amp; sealed with clear acrylic?
Why don't you just use two pieces of acrylic, one for the bottom %26amp; one for the top? You could find some kind of edging %26amp; then it would be easy to change out items if you ever wanted to.How to make a patio table top with clear acrylic, add postcards, palm leaves, etc %26amp; sealed with clear acrylic?
You can buy a bar finish to pour over your items. You can also buy marine finish, which I like best because it doesn't yellow and it is so strong and enduring.





Both are polyurethene finishes and easily applied.





Good luck! It sounds like it will be a wonderful table!

Where can I find the clear acrylic lightswitch kits that are for embroidery designs on fabric.?

I have embroidery designs that are made for lightswitch covers, but I don't know where to get the clear switchplate kits.Where can I find the clear acrylic lightswitch kits that are for embroidery designs on fabric.?
Most home inprovement stores carry them. I got mine from Home Depot. Hardware stores have them also. They are sold as to put wallpaper inside them but the embroidery on fabric works very well.Where can I find the clear acrylic lightswitch kits that are for embroidery designs on fabric.?
I found some at Home Depot; they didn't have a huge selection because most of the covers already had designs on them, but you should be able to find some there. Lowe's may also have some, too. Hope this helps you--good luck. Ann
I've seen them at my local Home Depot. I bet craft stores like Michael's and A.C. Moores sell them. Check there.
Go to www.herrschners.com They have clear acrylic ones that you can put your needlework in.
try to find a website that specializes in frames and such for cross stitch.
Mary Maxim also has these available

Tips for taking a picture of clear acrylic?

How can I take a good picture of a clear acrylic cutting board? There is wording in the middle of the board I want the viewer to see. I'm having problems with the reflections and lighting.Tips for taking a picture of clear acrylic?
Your main light (large soft box) positioned behind the object - tape black card to it, so it holds light off the wording and the edges of the product. Basically creating stripes of light and shadow.





Don't forget to make sure that your main light doesn't flare your lens. A black card flag will prevent it happening.





Keep your fill light soft, preferably bounced off white reflectors (polystyrene works fine).Tips for taking a picture of clear acrylic?
Put the cutting board on dark fabric and use soft lighting. Shoot from an angle, playing attention to the background, to minimize reflections.





Not unlike this setup: http://www.flickr.com/photos/samfeinstei鈥?/a>

Whats a good way to store Clear Acrylic Stamps?

I'm looking for maybe a case that's made for acrylic stamps sold in stores or online or any ideas on safely storing these....





I have stamps of all shapes and sizes, so something that would fit a wide range of stamps would be preferred!Whats a good way to store Clear Acrylic Stamps?
Many people keep their clear acrylic stamps in a binder with plastic sleeves in it. Here's one lady who set up a file box for hers:





http://mynextthirtyyears.com/sharing-my-鈥?/a>





Also try empty CD cases. You can buy them in bulk and use them without any other inserts as the stamps will adhere to the plastic cases.





Here's some more information about how to store them and how to treat stamps in general. I like the envelope idea:





http://www.bladerubberstamps.co.uk/site/鈥?/a>

Where can I get a large sheet of 3mm thick clear acrylic plastic?

...I want to do 'secondary glazing' on an old victorian sash window and for this I need to buy and cut a sheet of 3mm acrylic...where would be a good place to buy this? I live in East Sussex and the usual suspects would be: B%26amp;Q, Focus, Wickes erm....any other ideas or any specialist suppliers? Will they deliver, do you know? Ta.Where can I get a large sheet of 3mm thick clear acrylic plastic?
I bought some from Wickes recently. They're normally cheaper than B%26amp;Q and it is not the sort of item you can save money over the internet, unless you buy lots.Where can I get a large sheet of 3mm thick clear acrylic plastic?
your local conservatory company or you may find some in local salvage shop ( old shower door or screen should have enough clear to cut and use) and would be bought cheap
I have seen large sheets of rigid plastic covered in a peel-off film in B%26amp;Q ( in the building section)

I have clear acrylic sheet can I spray paint it with regular spary paint to work as a kind of shade?

Using it as a window in my shed, just wanted to block people from being able to see in. will the spray paint stick to it and will it not melt or react to it?I have clear acrylic sheet can I spray paint it with regular spary paint to work as a kind of shade?
even better, get or borrow a random orbital sander with some high grit pads ( like 120 or higher), and sand it lightly, start with the highest grit you have first





you will end up with something that looks very much like frosted glass. it will let in light, without allowing people to clearly see through it.





try this first, if you don't like it, try painting, since the paint will have a much better chance of sticking to the sanded side anywayI have clear acrylic sheet can I spray paint it with regular spary paint to work as a kind of shade?
You can use spray paint. Give it a light sanding with a fine sand paper first.

microsoft word>

Does a clear acrylic guitar need a pickguard?

Here's the issue, there is a clear bass guitar I want, but I don't want to scratch it up. But, there is no place to screw in a pick guard. Tape would look wierd unless there are pick guards for bass guitars without holes in it. Will the acrylic guitar get scratched just like wooden types if I don't put a pickguard on it?Does a clear acrylic guitar need a pickguard?
All guitars get scratched up whether you want them to or not. Beer happens, shows happen, they get dropped, knocked against the drums, bump into mic stands, etc.





I don't think that a bass really needs a pickguard though. Every bass player I've ever worked with either used their fingers or a pick, but didn't strum like a regular guitar.





You shouldn't need one, but if you think that you do, go to hobby lobby and get some clear contact paper, it will be pretty much invisible and it's cheap to replace if you think it starts getting scratched up. And...it won't do any damage to the finish on your bass. I've never used it for a musical instrument but I have used it on the rocker panels of my hot rods to protect the paint from rubber during burnouts.





If it's good enough for my cars, it's good enough for a guitar.





Hope this helps.

Is it safe to smoke out of a clay pipe if I sprayed clear acrylic sealer on it?

I didn't put glaze on it or anything.Is it safe to smoke out of a clay pipe if I sprayed clear acrylic sealer on it?
If you're talking about ';earth'; clay (not polymer clay, or another air-dry clay besides earth/pottery/ceramic clay), then you can put hot coals directly on it (whether you've glazed it or not).





You wouldn't want to put hot coals directly on various kinds of plastic though, including acrylic sealers, because they will burn and emit toxic smoke and fumes with much less heat than that.








HTH,





Diane B.

I want to paint my spindles on my stairs white,I already have 2 coats Clear Acrylic-Urethane Satin,thanks?

With this being an acrylic urethane you can get a product called ';Wil-bond'; it's a liquid deglosser, wipe down areas to be painted and paint, no sanding required. You must read the directions though for use because you only want to prep (wipe down) what you can paint in 30 minutes, how it works is it will soften that urethane for that long, once it starts to harden again it will take the paint and harden that with it so you get a good bond, saves the mess and hassle of sanding, any deglosser , liquid sand will due but I've been using the Wil-bond for over 35 yrs and find it to be the best, good luck Les the painter

Can I use a clear stamp without a clear acrylic handle?

I recently purchased two 'perfectly clear stamps' without realizing that I hadn't got an acrylic handle!! Would it be possible to use the stamp without it?Can I use a clear stamp without a clear acrylic handle?
You can ,but it will be a lot harder to make a Perfect image . Try it on some scrap paper first. Good Luck ;)))Can I use a clear stamp without a clear acrylic handle?
i have used clear stamps by using them with the top cover of the ink pad (if big enough) and also a clear plastic ruler but remember to make sure that you press down properly on the top of the stamp to get a good result - especially if the top cover of the ink pad is rounded.





It's amazing what you can improvise with when you are desperate.
If you are using them for what I think you are (stamping colors), sure you can, with the likelihood that you will paint/ink the ends of your fingers holding the edges of the stamp block and have to be careful not to touch them to the paper/fabric.


Edit


On the other hand, if this is what you mean http://www.stampendous.com/stampsfdr/pcs鈥?/a> it would be fairly awkward as the actual image stuff is soft and odd shaped, I thought you meant blocks without raised handles.


Wander down to your local hardware store if that is more convenient than hobby shop and ask if they have any scraps of plastic cut offs from making window panes in plastic. I would use glass, smoothing the edges with a hand grind stone, but I have it around.
No not really. You need a hard flat surface to put them on to stamp down and get a good inked image.. Wal Mart has the clear acrylic blocks cheap.

Where can I buy clear acrylic for a craft project?

The acrylic needs to be able to adhere to glass and wood and be at least one inch thick.Where can I buy clear acrylic for a craft project?
Not sure if you want a sheet of acrylic (plexiglass, etc) or you want a clear water-based liquid that would harden and adhere to glass and wood.





It won't be easy finding a *sheet* of plexiglass that thick though unless perhaps you go to a plastics store like Tap Plastics. (I guess you could always stack thinner sheets together, but not sure if there would be visual distortion when as thick as one inch.)


You could use a clear adhesive if you wanted to adhere those sheets to glass or wood... perhaps a 2-part epoxy glue or E6000.





You can use a resin though and create the size and shape you want (all resins are naturally adhesive, though it would be best to seal or paint any bare wood before using with resin since they're porous if not and won't necessariliy look as good.).


For something as thick as 1';, you'd probably want a *polyester* resin rather than an epoxy resin (like ';bar top resin'; or Envirotex Lite) but you'll have to deal with the surface problems they have after curing if you leave the surface exposed to the air while curing.





I also can't tell if you'd want to use a craft polyester resin (like Castin' Craft's Clear Polyester Casting Resin) or if you'd be okay with just the kind of polyester resin more often used for making fiberglass (those are sold at auto stores, boat stores, etc).





You can check out this page at my site though for more info on the types of resin, and what they're used for, lessons, etc, if you're interested:


http://glassattic.com/polymer/other_mate鈥?/a>





HTH,





Diane B.Where can I buy clear acrylic for a craft project?
I would go to your local hardware store like Home Depot, Lowe's. They have all of this and more. Some craft shops may carry acrylic but not always in the size you are looking for. At the hardware shops they can cut it down from a sheet for you and you will find it in different thickness. Good luck
Let's check this at Amazon.





http://www.amazon.com/s/qid=1250137849/r鈥?/a>
I would totally try a craft store. Ask them and most of the time they can help you out in finding what you need. Good luck to you.
shopping online here : http://rds.yahoo.com/**http%3a//www.amazon.com/gp/product/B0001DSYY0?ie=UTF8%26amp;tag=weisho-20%26amp;linkCode=as2%26amp;camp=1789%26amp;creative=390957%26amp;creativeASIN=B0001DSYY0

I am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?

strong enough for tables and chairs to be set on the pool cover. I have seen pictures of this at party rental places. I wish to buy the system instead of renting one.I am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?
I saw a Hollywood party on TV (on Oprah?) where the party was over a pool on just the type of system you are talking about. I didn't find the exact thing. There is a reference book called Sweets used by designers and architects published by McGraw Hill. It has volumes and volumes of categorized products. The online version is cumbersome, so I didn't attempt it, but check it at your library. Another is the Thomas Register, which is more of a source reference for business and manufacturers.





I wonder if the sytem might be available from companies who specialize in stages. The only ones I saw of this nature were intended to sit on a floor and would not span any distance (though some of the lighting ideas could be cool for your application).





Still, in my search I did find one product that might work. The web page didn't talk about maximum spans or the like. For what its worth, here it is:





http://www.discountdisplays.com/flooring鈥?/a>I am looking for a clear acrylic solid pool cover with truss system, strong enough for people to walk?
The system you are wanting to purchase is a custom built pool cover that uses structural aluminum trusses and brackets. These things are extremely expensive and very time consuming to install and/or remove for storage.





A country club in Virginia that I went to had a similar system... it wasn't clear because the support structure was ugly. It was however very strong and used hardwood sheets as floor covering over a sub-floor. It snapped and locked together and also had a slight arch for added support.





If you have the room for storage, the muscle and people to assist in it's assembly and dis-assembly, and the disposable income to purchase this monster... then start contacting some country clubs and pool warehouses for leads on a company that may fabricate such a thing. Be very careful about warranty and liability for weight and load restrictions.





Good luck.

microsoft word>

Has anyone used hair spray or clear acrylic spray to preserve a carved pumpkin?

I read that you can spray a carved pumpkin with hair spray or clear acrylic spray to help preserve it longer. Has anyone used either of these methods? Just wondering if they really work. Seems odd to use something flammable when there will most likely be a lit candle inside. Thanks for any help.Has anyone used hair spray or clear acrylic spray to preserve a carved pumpkin?
I have used petroleum jelly around exposed areas to prevent cracking and to keep it moist. It does help a bit. I also refrigerated it for a few hours a day and soaked it in the sink in cold water when it starts to shrivel a bit. It helps to put moisture back in it. Also, there is a spray that (they claim) is non flammable called Pumpkin Fresh that is supposed to help preserve it - www.pumpkinfresh.com I have never tried it but it sounds much safer than using something potentially flammable. Good luck and Happy Halloween! :-)





Home Elixir Home Staging


www.homeelixir.com

Where can I get a clear acrylic swivel chair?

I live in NJ and I wanted to know where I would be able to get a cool, clear swivel chair for my room. I would like it if it had a place to rest my arms. It would be good if it was new or refurbished, but either way it would need to be under $100. Please tell me if you have any suggestions. ThanksWhere can I get a clear acrylic swivel chair?
i think its gonna run you more than 100 dllars . sorry to say





try craigs list or give nextag dot com or ebay a shot





this isn't a common thing you see every day





hope you luck out _ i think its gonna be tough (i could be wrong)Where can I get a clear acrylic swivel chair?
Time to hit the telee
b i have no clue and you know that. check online or check jb teen
Did you look at IKEA!

Where can I find clear acrylic Christmas tree balls?

The kind you can fill with different things. I need them for a classroom party craft but I don't know where to find what I'm looking for. Any ideas?Where can I find clear acrylic Christmas tree balls?
Jo Ann Fabrics and Craft Stores and Michaels Arts and Craft Stores.Where can I find clear acrylic Christmas tree balls?
Michael's or Hobby Lobby ;)))
I have already seen them out at Hobby Lobby

What causes clear acrylic to get cloudy INSIDE the surface?

My golf cart windshield has a milky white streak inside the surface and I am not sure where it came from. Any ideas, and any help on how to get rid of it?What causes clear acrylic to get cloudy INSIDE the surface?
You may have got some moisture inside a layer (possibly from a separation). If warming the acrylic (100F to 130F) for some extended time doesn't get rid of that you may have to replace it. ~


Could be a manufacturer's defect and under warranty.What causes clear acrylic to get cloudy INSIDE the surface?
Happy to help.

Report Abuse

Acrylic (Plexiglas) is susceptible to the elements. Exposure is brutal to acrylic over time. Not to mention, a golf ball will go right through it.


Lexan(R) is a polycarbonate plastic that holds up very well to the elements. Golf balls wish they could penetrate it... It is used for the lighted sign faces you see on businesses because of it's durability and clarity.


If you decide to replace your windshield, I strongly suggest that you use Lexan(R) or another brand name of polycarbonate sheet.


Please check the link below for other comments from this site on this subject from seven months ago...





http://sg.answers.yahoo.com/question/ind鈥?/a>





Thanks to ';Singer'; and the other posters for their previous posts on this subject.





I hope this helps!
fgfg

Is there a way to permanently attach a photograph to a clear acrylic sheet?

Can the photo be attached so that is can be washed in water or a dishwasher?Is there a way to permanently attach a photograph to a clear acrylic sheet?
You can print images directly onto acrylic sheets using waterproof inks but I doubt if they would survive a dishwasher.


If you want to transfer images to mugs or dishes you'd need to use a heat transfer method.Is there a way to permanently attach a photograph to a clear acrylic sheet?
I wouldn't COUNT on this, but I have some ';laminating pockets'; that I got at WalMart that seem pretty good. They are made by 3M. They have different sizes, including one for ID tags. The thing I like about them is that they do not have adhesive in contact with the image. They are sealed around the edges. You just slide your photo in and press the top together to seal it shut after you're done. I'm sure that they are sold in Staples and other office supply places and probably Michael's and other craft stores, as well.





I don't use them much, but I'm just letting you know that they exist and I've tried them out a few times and they seem to live up to their promise.